non-pigmented water-based modified acrylic
Used to prime or seal a surface
before refurbishing
suitable for a wide range of substrates.
Particularly useful on
loose friable surfaces
or substrates with high
water suction.
PrimeTech brushed on
consolidates the ‘old’ loose substrate surface
eg. new or old plasteror concrete walls or gib
providing a sound surface to work with,
paint on to or Wallpaper.
Aids adhesion between
the ‘old’ substrate and subsequent later over
toppings.
Surfaces sealed with PrimeTech
will require less
‘high cost’ decorative paint
due to reduced rate of absorption into the old substrate.
Mitico PrimeTech is an excellent Bonding agent for
cement,
enhancing the adhesive bond
between the old concrete substrate and
the new concrete.
PrimeTech may also be used as an additive in
concrete.
Imparting
a ‘buttery’ feel to ‘wet’ concrete mix.
Greatly improves
the
‘cured’ concrete strengths
both in interior or exterior applications.
For most applications Mitico PrimeTech is diluted one to one with
water,
and either hand mixed or shaken after the addition of water.
Coverage Sealer/Primer/Bonding agent
(fully diluted) 32 sq.
meters per litre
Note two
diluted coats may be needed for very powdery, high suction surfaces.
Use neat on non-absorbent
surfaces eg. Ceramic tiles 16
sq. meters per litre
For use as Concrete additive use level 4 to 8 litres per 40 kg
bag OP cement
available in 4 or 20 litre plastic cubes
